Thixotrophic gel type or Pate on type material for direct application to skin to make molds of wrinkles and other uses in cospmetic practice
especially picks up fine details. Controlled flow.
Simple 1:1 ratio with a working time of 5-8 minutes with a cure time of 9-10min minutes @ 25°C.
It exhibits minimal shrinkage (0.1%) and can accurately replicate intricate details. This type of Silicone has a prolonged lifespan in moulds and boasts exceptional release capabilities. As a type of addition or platinum-cured Silicone, it maintains excellent dimensional stability and is resistant to deformation, ensuring a lasting shelf life.
The color of the cured Silicone can be modified by adding a color pigment while mixing the two components. We offer a variety of compatible color pigments
Mixing time: 1 min
Working time 5 min
Setting time 12 min
CAUTION: CURE INHIBITION
While a release agent may not be sufficient to prevent cure inhibition, a layer of paint can. It is important to allow solvent-based paint enough time to fully evaporate, as the solvent can inhibit the cure process. Extreme caution should be exercised when handling and mixing addition-cured silicone elastomer systems. All mixing tools should be clean and made of materials that do not interfere with the curing process. The cure of the Silicone can be inhibited by nitrogen, sulfur, phosphorus, and arsenic compounds; organotin catalysts and PVC stabilizers; epoxy resin catalysts; or contact with materials containing these substances, such as moulding clays, sulfur vulcanized Silicones, condensation cure silicone Silicones, some printed plastics, onion, and garlic.
