Silicone Mold Softener

Silicone thickening liquid Silicone thickening liquid This product is suitable for both condensation/tin and addition/platinum silicones. It is a very potent thixotropic (thickening)  effect, typically in the range of 0.1-3% is required to get the desired consistency.  Consistency can range from viscous material for use with a brush or gel type for use with a spatula or hand. When used with tin/condensation cure silicone it can be added both before or after addition  of the catalyst. It is recommended you adjust the viscosity of silicone fluid before adding the catalyst so that pot life is not affected.  Intially unthickened material should be applied to mold taking care not to trap air. This will capture fine details of mold. Then more thickened material can be added to fill up mold. Ensure first layer is still wet before applying adding rest. .

Wax in a solvent carrier liquid. For use  as surface coating/sealant of porous surfaces prior to taking a  two part silicone molds. It allows for easy release of silicone impression mold .  When casting resin into a silicone mould using a release agent will help prolong life of mold. Directions: Apply one to two coats allowing each coat to dry before applying the next More coats may be required for Porous materials such as wood, concrete and plaster etc Apply with a brush, or standard air gun/air brush or dip the item in the liquid.