COMING SOON-NEW PLACE TO BUY FULL RANGE OF SILICONE FOR MOULDING INDUSTRY

Search

9 in stock

RTV2 silicone condensation tin CATALYST

RTV2 Condensation type Silicone tin catalyst  Recommended for general mold work Silicone

Base Color: White    Curing Agent: Transparent/BlueMix ratio: 100:2    Pot life: 30-40 mins     Curing time: 4-6 hrs              Hardness: 15-28 shore A

RTV2 Condensation type Silicone tin catalyst  Recommended for general mold work Silicone Base Color: White    Curing Agent: Transparent/BlueMix ratio: 100:2    Pot life: 30-40 mins     Curing time: 4-6 hrs              Hardness: 15-28 shore A

£4.00£9.90

Clear
SKU:N/A

RTV-2 silicone Liquid  is generally named as two-part room-temperature vulcanized silicone rubber, which features exceptional fluidity and good operability. When mixed with 2-3% curing agent, they can still be operated within 30-40 minutes, but will be formed after 4-6 hours. With resistance to deformation, high temperature, acid and alkali, and expansion.

PRODUCT FEATURES

1. Good flow ability and long working time

2. Excellent performance for duplication

3. High tear and tensile strength

4. Easy de-mould from complex replica parts

5. Acid and alkali-resistance

6. Low linear shrinkage

Ratio of Catalyst Pot Life Cure Time
4% (4g per 100g) 4-6 minutes 1.5 – 2.5 hours
3% (3g per 100g) 15-20 minutes 3-5 hours
2% (2g per 100g) 25-30 minutes 7-10 hours

Technical Data (approx values)

soft/hard soft is suitable for molding delicate/fragile objects.

 Color  White
 Curing Agent  Tin Catalyst
 Mixing ratio  see ifu
 Mixed Viscosity  18000cps
 Working time  30-40mins
 Curing time  4-6 hours
 Hardness 15-28 shore A
 Tear Strength 32 N/mm
 Tensile Strength 3.8Mpa
 Shrinkage  ≤0.3%
 Elongation  55

 

USING INSTRUCTION

1-Take 100g of part A and add 2g of part B catalyst  and mix the silicone rubber and curing agent evenly in the container stirring and making sure not to incorporate air..

2-vacuum pumping may be applied
3-Pouring into a mold or block mold of silicone rubber
The pouring way is an easy way such as a long treacle to fill molds, it’s slowly . Allow to set.

or creating a two part mold or moulding a glass object a release agent is required click here

Can be pigmented to a wide range of colours  It can be softened to your own requirements using this softening additive  Can be made thixotropic for applying to vertical surfaces or to over head objects

SUITABLE FOR USE WITH

Polyurethane resin *
(* Excl. some transparent polyurethanes, check with the supplier of the resin if silicone molds are suitable.)

Epoxy resin *
(* Excl. some epoxies, check with the supplier of the resin if silicone molds are suitable.)

Polyester resin

Acrylic resin

Plastisol (PVC)

Plaster

Cement

Polymer Clays

Waxes

Soaps

Metals with a pouring temperature below 180°C

not Suitable for use with food .

Catalyst Irritant  see IFU.

Pack Size

30ml, 60ml, 150ml

soft hard

soft, hard

Bestsellers

RTV2 silicone condensation tin CATALYST

£4.00£9.90
(0 Reviews)
RTV2 Condensation type Silicone tin catalyst  Recommended for general mold work Silicone Base Color: White    Curing Agent: Transparent/BlueMix ratio: 100:2    Pot life: 30-40 mins     Curing time: 4-6 hrs              Hardness: 15-28 shore A

Silicone Light Body for Dental Use

£15.00
(0 Reviews)
catalyst) that can be easily mixed and applied by hand  and it  is mixed in equal amounts (1A:1B) by volume/weight, it has a pot life of about 2-3 minute with a cure time of about 5-8 min at room temperature (73°F/23°C). Shrinkage is low and cured rubber is exceptionally strong (very high tensile strength), They also resist cure inhibition. It is also FOOD SAFE and can be used for culinary applications. 50ml cartridge pack

RTV2 Liquid electronic potting silicone-addition cure

£68.00£998.00
(0 Reviews)
Thermal Conductive Two-Component RTV Silicone  Elastomer for Electronics Potting Two-component room temperature cure potting compound with mix ratio of 1: 1, curing time can be accelerated by heating up, features with good flow ability and flame resistance. It's suitable for encapsulating of LED displayers, power module and electronics components, etc.

Silicone Thixotrophic agents

£3.60£6.00
(0 Reviews)
Silicone thickening liquid Silicone thickening liquid This product is suitable for both condensation/tin and addition/platinum silicones. It is a very potent thixotropic (thickening)  effect, typically in the range of 0.1-3% is required to get the desired consistency.  Consistency can range from viscous material for use with a brush or gel type for use with a spatula or hand. When used with tin/condensation cure silicone it can be added both before or after addition  of the catalyst. It is recommended you adjust the viscosity of silicone fluid before adding the catalyst so that pot life is not affected.  Intially unthickened material should be applied to mold taking care not to trap air. This will capture fine details of mold. Then more thickened material can be added to fill up mold. Ensure first layer is still wet before applying adding rest. .

Silicone Mold Putty multi use -platinum catalyst

£5.70£37.80
(0 Reviews)
Silicone putty is new silicone compounds (platinum catalyst) that can be easiy mixed and applied by hand to a variety of usage . It has a pot life of about 5-20 mins with a cure time of about 30-60 mins at room temperature.Shrinkage is low and cured rubber is exceptionally strong (very high tensile strength) .They also resist cure inhibition. suitable for DIY mols,

Silicone Putty & light body for OTO Use

£35.00£44.00
(0 Reviews)
Product Description The two materials dispensed via syringe are combined on a 1:1 ratio and mixed syringe tip until a uniform colour is achieved. It is easy to dispense easily directly into ear. Mixing time: 30-45 seconds. Setting time at body temperature: 3.5 minutes (less mixing time). Supplied as a pair of 660g tubs - one blue (base) and one white (catalyst). Shore hardness: 30

Silicone Putty for Dental Use

£21.00
(0 Reviews)
Silicone Putty is new silicone compounds (platinum catalyst) that can be easily mixed and applied by hand  and it  is mixed in equal amounts (1A:1B) by volume/weight, it has a pot life of about 2-3 minute with a cure time of about 5-8 min at room temperature (73°F/23°C). Shrinkage is low and cured rubber is exceptionally strong (very high tensile strength), They also resist cure inhibition. It is also FOOD SAFE and can be used for culinary applications.

Back to Top
Product has been added to your cart