This product is suitable for both condensation/tin and addition/platinum silicones.
It is a very potent thixotropic (thickening) effect, typically in the range of 0.1-3% is required to get the desired consistency. Consistency can range from viscous material for use with a brush or gel type for use with a spatula or hand.
When used with tin/condensation cure silicone it can be added both before or after addition of the catalyst.
It is recommended you adjust the viscosity of silicone fluid before adding the catalyst so that pot life is not affected. Intially unthickened material should be applied to mold taking care not to trap air. This will capture fine details of mold. Then more thickened material can be added to fill up mold. Ensure first layer is still wet before applying adding rest.
.
Silicone thickening liquid
This product is suitable for both condensation/tin and addition/platinum silicones.
It is a very potent thixotropic (thickening) effect, typically in the range of 0.1-3% is required to get the desired consistency. Consistency can range from viscous material for use with a brush or gel type for use with a spatula or hand.
When used with tin/condensation cure silicone it can be added both
before or after the addition of the catalyst.
It is recommended you adjust the viscosity of silicone fluid before adding the catalyst so that pot life is not affected. Intially unthickened material should be applied to mold taking care not to trap air. This will capture fine details of mold. Then more thickened material can be added to fill up mold. Ensure first layer is still wet before applying adding rest.
.
This product is suitable for both condensation/tin and addition/platinum silicones.
It is a very potent thixotropic (thickening) effect, typically in the range of 0.1-3% is required to get the desired consistency. Consistency can range from viscous material for use with a brush or gel type for use with a spatula or hand.
When used with tin/condensation cure silicone it can be added both before or after addition of the catalyst.
It is recommended you adjust the viscosity of silicone fluid before adding the catalyst so that pot life is not affected. Intially unthickened material should be applied to mold taking care not to trap air. This will capture fine details of mold. Then more thickened material can be added to fill up mold. Ensure first layer is still wet before applying adding rest.
RTV-2 Silicone platinum catalyst silicone
especially developed for enginerring prototype and Jewalery.
for use with Polyester & Epoxy Resin Casting inc plaster casts
Silicone Base Color: White Curing Agent: Transparent/pink
Mix ratio: 100:2 Pot life: 30-40 mins
Curing time: 4-6 hrs Hardness: 30t o 50 shore A
RTV2 Condensation type Silicone tin catalyst Recommended for general mold work Silicone
Base Color: White Curing Agent: Transparent/BlueMix ratio: 100:2 Pot life: 30-40 mins Curing time: 4-6 hrs Hardness: 15-28 shore A
Silicone liquid supplied with tin catalyst and thixotrophic additive to give optimum brush-on feature. This is a three-part kit comprised of a white base rubber; and catalyst when thoroughly mixed; a thixotropic additive that will thicken the liquid silicone making it suitable for applying with a brush or spatula to vicious consistency for making glove moulds .
Product is skin and food safe
For the platinum Catalyst system this can be added either liquid, however for the silicone tin catalyst system it should be added to base paste not the catalyst.
Use: to soften silicone molds. Only a small quantity is required.
Adding above 5% will start retarding the reaction giving a longer pot life and cure time
Tin/Condensation Cured Silicone- guide
1ml added to 100ml base paste hardness reduced by 10%
3ml added to 100ml base paste hardness reduced by 30%
5ml added to 100ml base paste hardness reduced by 50%
Platinum/Addition Cured Silicone
5ml added to 100ml base paste hardness reduced by 9%
10ml added to 100ml base paste hardness reduced by 18%
15ml added to 100ml base paste hardness reduced by 25%
Silicone putty is new silicone compounds (platinum catalyst) that can be easiy mixed and applied by hand to a variety of usage . It has a pot life of about 5-20 mins with a cure time of about 30-60 mins at room temperature.Shrinkage is low and cured rubber is exceptionally strong (very high tensile strength) .They also resist cure inhibition.
suitable for DIY mols, Foot and Hoof impressions.
£109.00–£1,500.00Price range: £109.00 through £1,500.00
(0 Reviews)
Thermal Conductive Two-Component RTV Silicone Elastomer for Electronics Potting
Two-component room temperature cure potting compound with mix ratio of 1: 1, curing time can be accelerated by heating up, features with good flow ability and flame resistance. It's suitable for encapsulating of LED displayers, power module and electronics components, etc.
RTV2 Condensation type Silicone tin catalyst Recommended for general mold work Silicone
Base Color: White Curing Agent: Transparent/BlueMix ratio: 100:2 Pot life: 30-40 mins Curing time: 4-6 hrs Hardness: 15-28 shore A
