COMING SOON-NEW PLACE TO BUY FULL RANGE OF SILICONE FOR MOULDING INDUSTRY

Search

10 in stock

Silicone Putty for Dental Lab Use -Tin catalyst

Silicone Putty is new silicone compounds (platinum catalyst) that can be easily mixed and applied by hand  and it  is mixed in equal amounts (1A:1B) by volume/weight, it has a pot life of about 2-3 minute with a cure time of about 5-8 min at room temperature (73°F/23°C). Shrinkage is low and cured rubber is exceptionally strong (very high tensile strength), They also resist cure inhibition. It is also FOOD SAFE and can be used for culinary applications.

 Silicone Putty is new silicone compounds (platinum catalyst) that can be easily mixed and applied by hand  and it  is mixed in equal amounts (1A:1B) by volume/weight, it has a pot life of about 2-3 minute with a cure time of about 5-8 min at room temperature (73°F/23°C). Shrinkage is low and cured rubber is exceptionally strong (very high tensile strength), They also resist cure inhibition. It is also FOOD SAFE and can be used for culinary applications.
400g/400gm pack

£20.00£98.00

Clear

Product Description

Siliocne activated by tin based catalyst

Fast Curing and Durable
Our putty is non-toxic and odor free.

Self-releasing – no mold release agent required for most applications. Long shelf life, no shrinkage. Not intended for food contact applications.

Features of Dental Silicone Putty:
Easy to use, 1-1.5 minutes working time, 3-5 minutes cure.
Excellent detail from original.
No Shrinkage.
Self releasing, no mold release agent required for most applications.
Odorless, Non Toxic. FDA Compliant, Food Grade.

Technical Details

Physical Properties:

Curing time   (37C)<6minutes

Hardness(Shore A) 65

Permanent deformation %   <0.2%

Applications of  Dental Use Silicone Putty:

Applications include making fast mold impressions from almost any surface, orthotics / orthopedic, equine hoof repair, jewelry making and more.

Using Instructions

Mix the two components together. It is recommended to use the blue spoon to take the base component and white spoon to take catalyst component. Use your fingertips to mix the two components together and knead for at least 30 seconds until they are mixed completely.

Precautions 

1. Do not use Latex rubber gloves. It is recommended to use disposable polyethylene plastic gloves.

The product contains platinum catalyst, sulfur, phosphorus, amine, etc. will slow down or even stop the curing reaction, and thus it must avoid sulfur, phosphorus, amine, acrylic and meth acrylic acid esters and other chemical products in use.

The temperature has a significant impact on the curing time; the curing reaction will slow down at low temperature, and speed up at high temperature curing speed. It should adjust operation rhythm according to the environment and the finger temperature.It is strictly recommended to use the same amount of base and catalyst. Unequal amount will lead to delayed or accelerated cure.

Package of Silicone Putty

20KG 50KG

 

 

PUTTY size

1kg, 5kg, 20KG

CATALYST pASTE

60GM TUBE, 300gm, 1200gm

Bestsellers

RTV2 silicone condensation tin CATALYST

£4.00£9.90
(0 Reviews)
RTV2 Condensation type Silicone tin catalyst  Recommended for general mold work Silicone Base Color: White    Curing Agent: Transparent/BlueMix ratio: 100:2    Pot life: 30-40 mins     Curing time: 4-6 hrs              Hardness: 15-28 shore A

RTV2 Liquid electronic potting silicone-addition cure

£68.00£998.00
(0 Reviews)
Thermal Conductive Two-Component RTV Silicone  Elastomer for Electronics Potting Two-component room temperature cure potting compound with mix ratio of 1: 1, curing time can be accelerated by heating up, features with good flow ability and flame resistance. It's suitable for encapsulating of LED displayers, power module and electronics components, etc.

Silicone Thixotrophic agents

£3.60£6.00
(0 Reviews)
Silicone thickening liquid Silicone thickening liquid This product is suitable for both condensation/tin and addition/platinum silicones. It is a very potent thixotropic (thickening)  effect, typically in the range of 0.1-3% is required to get the desired consistency.  Consistency can range from viscous material for use with a brush or gel type for use with a spatula or hand. When used with tin/condensation cure silicone it can be added both before or after addition  of the catalyst. It is recommended you adjust the viscosity of silicone fluid before adding the catalyst so that pot life is not affected.  Intially unthickened material should be applied to mold taking care not to trap air. This will capture fine details of mold. Then more thickened material can be added to fill up mold. Ensure first layer is still wet before applying adding rest. .

Silicone Mold Putty multi use -platinum catalyst

£5.70£37.80
(0 Reviews)
Silicone putty is new silicone compounds (platinum catalyst) that can be easiy mixed and applied by hand to a variety of usage . It has a pot life of about 5-20 mins with a cure time of about 30-60 mins at room temperature.Shrinkage is low and cured rubber is exceptionally strong (very high tensile strength) .They also resist cure inhibition. suitable for DIY mols,

Silicone Putty & light body for OTO Use

£35.00£44.00
(0 Reviews)
Product Description The two materials dispensed via syringe are combined on a 1:1 ratio and mixed syringe tip until a uniform colour is achieved. It is easy to dispense easily directly into ear. Mixing time: 30-45 seconds. Setting time at body temperature: 3.5 minutes (less mixing time). Supplied as a pair of 660g tubs - one blue (base) and one white (catalyst). Shore hardness: 30

Silicone Putty for Dental Use

£21.00
(0 Reviews)
Silicone Putty is new silicone compounds (platinum catalyst) that can be easily mixed and applied by hand  and it  is mixed in equal amounts (1A:1B) by volume/weight, it has a pot life of about 2-3 minute with a cure time of about 5-8 min at room temperature (73°F/23°C). Shrinkage is low and cured rubber is exceptionally strong (very high tensile strength), They also resist cure inhibition. It is also FOOD SAFE and can be used for culinary applications.

OTO Ear impression accessories

£9.00£11.00
(0 Reviews)
Product Description Product Description ear plugs sponge, Syringe to inject siliocne into ear and 5oml silicone dispensing silicone impression gun.

Back to Top
Product has been added to your cart