For use as surface coating/sealant of porous surfaces prior to taking a two part silicone molds.
It allows for easy release of silicone impression mold . When casting resin into a silicone mould using a release agent will help prolong life of mold.
Directions:
Apply one to two coats allowing each coat to dry before applying the next
More coats may be required for Porous materials such as wood, concrete and plaster etc
Apply with a brush, or standard air gun/air brush or dip the item in the liquid.
Wax in a solvent carrier liquid.
For use as surface coating/sealant of porous surfaces prior to taking a two part silicone molds.
It allows for easy release of silicone impression mold . When casting resin into a silicone mould using a release agent will help prolong life of mold.
Directions:
Apply one to two coats allowing each coat to dry before applying the next
More coats may be required for Porous materials such as wood, concrete and plaster etc
Apply with a brush, or standard air gun/air brush or dip the item in the liquid.
For use as surface coating/sealant of porous surfaces prior to taking a two part silicone molds.
It allows for easy release of silicone impression mold . When casting resin into a silicone mould using a release agent will help prolong life of mold.
Directions:
Apply one to two coats allowing each coat to dry before applying the next
More coats may be required for Porous materials such as wood, concrete and plaster etc
Apply with a brush, or standard air gun/air brush or dip the item in the liquid.
RTV-2 Silicone platinum catalyst silicone
especially developed for enginerring prototype and Jewalery.
for use with Polyester & Epoxy Resin Casting inc plaster casts
Silicone Base Color: White Curing Agent: Transparent/pink
Mix ratio: 100:2 Pot life: 30-40 mins
Curing time: 4-6 hrs Hardness: 30t o 50 shore A
RTV2 Condensation type Silicone tin catalyst Recommended for general mold work Silicone
Base Color: White Curing Agent: Transparent/BlueMix ratio: 100:2 Pot life: 30-40 mins Curing time: 4-6 hrs Hardness: 15-28 shore A
HIGH TEMPERATURE RESISTANT
Odourless and non-toxic with a simple 1:1 mixing ratio. Forms a strong, tough, flexible and elastic yellow rubber that resists pouring temperatures of up to 370°C.
The pot life is approximately 8-12 minutes and the cure time is 1-2 hours.
There is practically no shrinkage (0.08%) and excellent reproduction of fine detail.
Primarily used for the casting of low melt alloys for casting military figures, jewellery, model parts and dolls house accessories in lead/tin alloys or pewter. It can also be used for casting resins, waxes, plaster etc.
catalyst) that can be easily mixed and applied by hand and it is mixed in equal amounts (1A:1B) by volume/weight, it has a pot life of about 2-3 minute with a cure time of about 5-8 min at room temperature (73°F/23°C). Shrinkage is low and cured rubber is exceptionally strong (very high tensile strength), They also resist cure inhibition. It is also FOOD SAFE and can be used for culinary applications.
50ml cartridge pack
£3.30Original price was: £3.30.£3.10Current price is: £3.10.
(0 Reviews)
Add to the silicone at a ratio of 2% to achieve vibrant colors.
Color pigments can be added to both addition platinum cured and condensation tin-cured rubbers.
The pigments are non-toxic and are suitable for use in rubber that will contact both food and skin.
Small amounts can be added to creat tones, the more pigment color strong.
Multiple colors can be mixed to create custom colors.
Silicone thickening liquid
Silicone thickening liquid
This product is suitable for both condensation/tin and addition/platinum silicones.
It is a very potent thixotropic (thickening) effect, typically in the range of 0.1-3% is required to get the desired consistency. Consistency can range from viscous material for use with a brush or gel type for use with a spatula or hand.
When used with tin/condensation cure silicone it can be added both before or after addition of the catalyst.
It is recommended you adjust the viscosity of silicone fluid before adding the catalyst so that pot life is not affected. Intially unthickened material should be applied to mold taking care not to trap air. This will capture fine details of mold. Then more thickened material can be added to fill up mold. Ensure first layer is still wet before applying adding rest.
.
Wax in a solvent carrier liquid.
For use as surface coating/sealant of porous surfaces prior to taking a two part silicone molds.
It allows for easy release of silicone impression mold . When casting resin into a silicone mould using a release agent will help prolong life of mold.
Directions:
Apply one to two coats allowing each coat to dry before applying the next
More coats may be required for Porous materials such as wood, concrete and plaster etc
Apply with a brush, or standard air gun/air brush or dip the item in the liquid.
